Wooden DAP stands in different woods on the workshop bench

DAP stand Wooden stand for digital audio players

A small desktop stand that holds your portable digital player upright and tilted: display and controls always within reach, cables tidy.

  • Oak-veneered plywood
  • For iBasso DX180–DX340
  • 4.4 and 3.5 mm outputs

Woods on requestSee the woods

  • Beech
  • Oak
  • American walnut
  • Cherry
  • Ash
  • Doussié
  • Wenge

€69prices on extrasound.it

Ask for informationBuy it on extrasound.it333 418 8754
DAP stand seen from below, with the headphone cables running through the base
Base of the DAP stand with the cut-out for the connectors
Wooden DAP stands side by side on the workbench
Digital audio player resting on the wooden stand, with the headphone cable

Your DAP becomes a desktop source.

Two 14 mm boards of oak-veneered plywood: one holds the player at an angle, the other is the base. The shaped base lets the 4.4 or 3.5 mm headphone connectors through and, with the iBasso DX270 and DX340, the external power supply too.

It's handy with headphones and IEMs, because the cable falls naturally, and when the player is connected to the hi-fi system as a source.

You'll find it in our showroom in Cesena. Fabrizio also builds it new, to the size of your equipment and your home.

MaterialOak-veneered plywood, 14 mm
Main board22 × 13 cm
Base13 × 13 cm
CompatibilityiBasso DX180, DX260 MK2, DX270, DX340
Headphone connectors4.4 mm and 3.5 mm
FinishNatural wood
All products: accessories